Product features

• • The chassis on which the body and accessories of the device are installed, has a fixed and movable base. For easier movement, the rear part of tray washer is wheeled and movable, and in addition, to prevent the device from moving during operation, the front part of it is placed on a fixed base. • main body is consists of two parts, the water tank and the washing chamber. • Stainless steel water tank is responsible for storing the water. • The function of the covers is to protect the electric motors and the electrical parts against water drop in washing time • The filters between the water source and the washing chamber are different size mesh., the first mesh is larger and the second is smaller mesh are responsible for separating the wastes from washing and cleaning the water to be ready for reuse. • The main chamber of the machine in which the washing is done is restrained on all four sides so that water does not spill out of the chamber during washing. In the upper part of the roof and on both sides of the steel wall and from the bottom of the water tank, and in the two charging and discharging openings, transparent plastic talc has been used. • The basket holder, which is located inside the washing chamber and is responsible for separating the baskets from each other. The height adjustment tube is placed inside the main compartment by means of chains and levers in front of the charging port to adjust the height of the baskets and prevents the baskets from deviating in the path. • The nozzles have the task of increasing the water pressure for washing. For complete cleaning of baskets and better washing, the nozzles are adjusted in four directions with different angles and with appropriate pressure. • Element, burner and steam injection valve (burner and steam valve are installed according to customer's request) to heat and keep the water temperature constant. • The electric pump is responsible for sucking water from inside the tank and delivering it through the pipes to the nozzles and creating the appropriate pressure at the nozzle outlet. • The electro
• gearbox is responsible for moving the Teflon conveyor chains leading the baskets. • Teflon conveyor chains are responsible for moving the baskets from the charging port to the unloading port. • To change the contaminated water and drain it in the bottom of the tank, a lid has been used which, when opened, empties the water inside the tank.